Slides
> Slide 1
> Slide 2
> Slide 3
> Slide 4
> Slide 5
> Slide 6
> Slide 7
> Slide 8
> Slide 9
> Slide 10
> Slide 11
> Slide 12
> Slide 13
> Slide 14
> Slide 15
> Slide 16
> Slide 17
> Slide 18
> Slide 19
> Slide 20
> Slide 21
> Slide 22
> Slide 23
> Slide 24
> Slide 25
> Slide 26
> Slide 27
> Slide 28
> Slide 29
> Slide 30
> Slide 31
> Slide 32
> Slide 33
> Slide 34
> Slide 1
> Slide 2
> Slide 3
> Slide 4
> Slide 5
> Slide 6
> Slide 7
> Slide 8
> Slide 9
> Slide 10
> Slide 11
> Slide 12
> Slide 13
> Slide 14
> Slide 15
> Slide 16
> Slide 17
> Slide 18
> Slide 19
> Slide 20
> Slide 21
> Slide 22
> Slide 23
> Slide 24
> Slide 25
> Slide 26
> Slide 27
> Slide 28
> Slide 29
> Slide 30
> Slide 31
> Slide 32
> Slide 33
> Slide 34
Mechanical Anchor Strength in Stone Masonry
Click on slide for full size in new window
In that same table, the proposed design value in stone is now highlighted. In four out of 8 cases, the 6000 psi (or above) design value could have safetly been used to design the anchors in natural stone. In four out of the 8 cases, the 4000 psi value was appropriately safe.
Click on slide for full size in new window
In that same table, the proposed design value in stone is now highlighted. In four out of 8 cases, the 6000 psi (or above) design value could have safetly been used to design the anchors in natural stone. In four out of the 8 cases, the 4000 psi value was appropriately safe.