Slides
> Slide 1
> Slide 2
> Slide 3
> Slide 4
> Slide 5
> Slide 6
> Slide 7
> Slide 8
> Slide 9
> Slide 10
> Slide 11
> Slide 12
> Slide 13
> Slide 14
> Slide 15
> Slide 16
> Slide 17
> Slide 18
> Slide 19
> Slide 20
> Slide 21
> Slide 22
> Slide 23
> Slide 24
> Slide 25
> Slide 26
> Slide 27
> Slide 28
> Slide 29
> Slide 30
> Slide 31
> Slide 32
> Slide 33
> Slide 34
> Slide 1
> Slide 2
> Slide 3
> Slide 4
> Slide 5
> Slide 6
> Slide 7
> Slide 8
> Slide 9
> Slide 10
> Slide 11
> Slide 12
> Slide 13
> Slide 14
> Slide 15
> Slide 16
> Slide 17
> Slide 18
> Slide 19
> Slide 20
> Slide 21
> Slide 22
> Slide 23
> Slide 24
> Slide 25
> Slide 26
> Slide 27
> Slide 28
> Slide 29
> Slide 30
> Slide 31
> Slide 32
> Slide 33
> Slide 34
Mechanical Anchor Strength in Stone Masonry
Click on slide for full size in new window
This table shows the number of specimens that were tested in tension for each variable combination. For both shear and tension specimens, we tried to achieve at least 8 tests so that we would end up with at least a statistically significant five specimens after an outlier analysis potentially eliminated data from the set.
Click on slide for full size in new window
This table shows the number of specimens that were tested in tension for each variable combination. For both shear and tension specimens, we tried to achieve at least 8 tests so that we would end up with at least a statistically significant five specimens after an outlier analysis potentially eliminated data from the set.