Slides
> Slide 1
> Slide 2
> Slide 3
> Slide 4
> Slide 5
> Slide 6
> Slide 7
> Slide 8
> Slide 9
> Slide 10
> Slide 11
> Slide 12
> Slide 13
> Slide 14
> Slide 15
> Slide 16
> Slide 17
> Slide 18
> Slide 19
> Slide 20
> Slide 21
> Slide 22
> Slide 23
> Slide 24
> Slide 1
> Slide 2
> Slide 3
> Slide 4
> Slide 5
> Slide 6
> Slide 7
> Slide 8
> Slide 9
> Slide 10
> Slide 11
> Slide 12
> Slide 13
> Slide 14
> Slide 15
> Slide 16
> Slide 17
> Slide 18
> Slide 19
> Slide 20
> Slide 21
> Slide 22
> Slide 23
> Slide 24
Documentation of Existing Facade Condtions in the Field
A Comparison of Two Methods
Placing the data block icon on the drawing calls up a prompt to enter the dimensions or extent of the fault. Photo ID numbers are also entered here if applicable. It is possible to calculate and enter the area (square feet) and length (linear feet) of a fault location and assign this information to the attribute tag.
A Comparison of Two Methods
Placing the data block icon on the drawing calls up a prompt to enter the dimensions or extent of the fault. Photo ID numbers are also entered here if applicable. It is possible to calculate and enter the area (square feet) and length (linear feet) of a fault location and assign this information to the attribute tag.